Our Impact
Tackling Earth’s biggest challenge.
Construction has a larger impact on the environment and economy than any industry, but lags far behind in circularity. The Unbuilt community is changing the game — ushering in a new era of circularity with measurable results.
01 · The Challenge
Construction's re-use gap.
The US spends roughly $1 trillion a year on building materials. About 10% of what's delivered to job sites ends up as leftover excess goods, yet less than 1% are ever reused.
These goods are set aside due to normal supply padding, design changes, specification conflicts, canceled projects or a myriad of other processes inevitable in construction work. Once sidelined, these goods are hard to re-direct back into use, despite being valuable and usable. When buildings are designed, materials are typically specified based on large catalogs of new goods. Once blueprints are locked, it's challenging for builders to locate, consolidate and re-certify pre-owned goods that may not be well-organized or easily shipped from job sites.
That gap carries a heavy cost to affordability and the environment. Every unused product is replaced with one that has to be mined, manufactured and shipped again. The failure to re-use contributes to construction's alarming footprint — on natural resources, housing costs and the climate.
02 · Reducing Waste
Living rooms, not landfills.
U.S. construction sends as much waste to landfill as all households and businesses combined.
While a significant share of the discarded debris could be avoided by salvaging more materials, the economic value of deconstruction (extracting usable materials during or before demolition) is undermined by the industry's single-use paradigm for material sourcing. Simply put, you can't salvage outputs that you can't sell as inputs. Fortunately, this paradigm is changing. As valuable materials are organized, consolidated and made available for sourcing, more builders are discovering them, and some are even adapting their projects to use them. Every transaction redirects surplus goods at high risk of entering the waste stream — not only saving landfill space, but changing behaviors.
Unbuilt has put over 200 tons of pre-owned goods back into re-use.
03 · Natural Resources
Unpaving paradise.
Half of all natural resources extracted worldwide go into buildings — more than any other sector.
Materials extraction itself is a leading driver of environmental loss: riverbeds, coastlines and mountains altered by mining and dredging, forests cleared for timber, land converted to quarries and roads built to access them. Many of these goods are non-renewable minerals and metals that won't be replaced. Reuse cannot undo extraction that has already happened, but each substitution means less new material has to be taken from the ground.
Each Unbuilt transaction saves an average of over 100 lbs of natural resources.
04 · Affordability
American dreaming for the rest of us.
The average new American home contains $174,000 of building materials.
Housing costs have outpaced incomes for decades, and material prices are highly dependent on geopolitics and supply shocks. During the pandemic, lumber nearly tripled in 13 months while steel more than doubled. For homeowners, small contractors, and designers working within a fixed budget, that steady escalation puts a growing share of projects out of reach.
Buyers on Unbuilt save 54% on new-condition goods, while sellers recoup overage costs.
05 · Climate
The King of Carbon.
Few sectors shape the climate as profoundly as the built environment.
Buildings generate greenhouse gas in two distinct ways. Operational emissions accumulate over a structure's life, from heating, cooling, maintenance and electricity. Embodied carbon comes from the materials themselves — the mining, manufacturing, and transport behind every component — and is fixed before anyone moves in. Operational efficiency, solar, and offsets still matter, but none of them reduce embodied carbon.
The 4,000+ products listed on Unbuilt could avoid about 1,500 tons of CO₂e as they sell.
06 · Community
From next door, not across the ocean.
The finishes and fixtures that go into a home — tile, lighting, stone, hardware — are largely manufactured overseas and shipped in, often on lead times of weeks or months. The cost of that distance doesn't appear on the materials invoice, but it surfaces as freight charges, breakage in transit, and delays that fall on the project schedule.
Unbuilt keeps supply chains local — making them faster, more resilient, and better for the communities they run through.
Buying from a seller nearby means pickup or installation can happen the same day. Every item is inspected before it's listed, so buyers are looking at the actual goods rather than a catalog rendering — which matters most when matching an existing finish. In effect, buyers and sellers source from one another locally, rather than from overseas factories.
07 · Materials
Material Categories
The table below lists construction material categories with high potential for re-use through secondhand resale. Each category has a unique impact on the environment and specific logistical drivers that generate large amounts of excess, unused goods.
| Environmental | Logistics | ||||
|---|---|---|---|---|---|
| Category | Resources | Mass | Overages | Returns | Discontinuation |
| Tile | Cement, fired clay | ||||
| Stone | Quarried stone, silica | † | |||
| Flooring | Timber | ||||
| Windows | Aluminum, vinyl, glass | ||||
| Kitchen & Bath | Metals, finishes, ceramics | ||||
| Lighting | Metals, electronics | ||||
| Appliances | Metals, refrigerants, electronics | ||||
† Stone overages are sold as remnants — offcuts and unused slab left after fabrication.
Environmental Drivers
These factors determine how much environmental impact is locked into a product.
- Mass — Large or heavy goods consume more resources and require more energy to extract, manufacture, and transport, making them the core contributor to a product's embodied environmental impact.
- Resources — Construction goods consume and create resources that are often scarce or hazardous: quarried stone and the silica dust that causes silicosis, the sand and aggregate that concrete depends on, now increasingly scarce worldwide, and timber products that drive deforestation — along with the metals, refrigerants, and electronics that make landfills toxic.
Logistics Drivers
These factors drive the excess material production, consumption, and waste that resale recovers.
- Overages — Because of long supply-chain timelines and the astronomical cost of construction delays, builders routinely over-order materials so that design changes can be accommodated without running out of supplies. As a result, most projects end with leftover extras that are hard to return and difficult to store.
- Returns — Items with nuanced designs, finishes, and specifications, especially those that deal with electricity, heat, or water, are increasingly bought through eCommerce sites and shipped to job sites sight unseen. This leads to high return rates — and uninstalled, re-boxed fixtures that online dealers struggle to resell as new.
- Discontinuation — Construction goods are designed to meet rapidly changing aesthetic tastes, regional building codes, and product-safety and technical standards. Manufacturers must constantly release new product lines and discontinue older ones, often leaving large quantities of perfectly good inventory behind.
Methodology
How we count.
Impact claims are easy to make and hard to back up. We document every assumption, flag what's measured versus modeled, and publish the formula behind every number.
The formula
Weight × carbon intensity (kg CO₂e/kg) × substitution rate (0.90). Three inputs, all sourced, all visible — applied to every transaction.
The sources
Primary: ICE Database v4 (Circular Ecology / University of Bath). Secondary: EC3, the open EPD database. Both cited per-row in our CII reference.
The boundary
A1–A4 — cradle to job site. Includes factory-to-site transport (default a4 = 0.15) so we don't undercount distance.
The honesty tier
Every per-product number is labeled measured, estimated, or default. Historical estimates use conservative category-tier weights; live transactions use measured PKG weight when available.
The lifetime figures on this page come from 2,737 sold product lines through October 13, 2026, scored with methodology v1.1. See the full fact sheet →

Live Impact Data
Every product makes a difference.
Every listing on Unbuilt carries its own impact figure: the resources, dollars, and carbon it represents, calculated for that specific product rather than taken from a category average. The same accounting that produced the numbers on this page runs on each item in the catalog, so the effect of a renovation, an office build-out, or a single fixture can be measured as it adds up.
Used Materials
Unconditional love.
At Unbuilt, we love goods in any condition, but we typically focus on those that are new and unused. This includes job site leftovers, unopened or uninstalled customer returns, or discontinued lines from manufacturing partners. For some categories of goods that may be high-value, or where previous use does not degrade quality significantly, we make exceptions, including some types of materials, windows, reclaimed wood, flooring, and appliances. For older goods that fall outside these categories, we recommend:
- Build Reuse — to find local salvage yards in your area.
- Habitat for Humanity ReStores — a national network of local non-profits.
- Facebook Marketplace — a good place to self-list items for attention from a large, diverse community of interest.
Work with us
Join the mission.
Partners
Manufacturers, dealers, designers, architects, developers, deconstruction businesses, and non-profits — anyone routing excess to its next life.
Start a conversation →Press
Fact sheet, methodology notes, case studies, and founder availability for interviews.
Read the fact sheet →


